Camso RipSaw Full Snowmobile Track (utility)

A modified version of the proven RipSaw design, built for utility use. Its 1.25 in (32 mm) full-block lugs are a popular upgrade for utility snowmobiles that came with 1 in (25 mm) lugs.

Utility track: for work snowmobiles and wide-track models.

Features

• Lug heights of 1.25 in (32 mm) and 1.375 in (35 mm)
• Full-block lugs for traction in soft, loose snow
• Angled lugs for aggressive forward and lateral bite on hard snow

Available sizes

Some sizes come in two distinct Camso versions: choose the part number that matches your current track, or contact us.

How to choose the right track

• Length: according to Camso, length is the inside circumference of the track (drive pitch multiplied by the number of segments). It must match your original track: check the owner's manual or the number molded on your current track.
• Pitch: the distance between the drive sprocket teeth. According to Camso, it must match your existing track, or the drive sprockets must be changed. On Ski-Doo, Gen4 and Gen5 trail platforms generally use a 2.86 in pitch, while older REV platforms use 2.52 in. Handy reference in our lineup: 120, 129, 137 and 146 in lengths are 2.86 in pitch, and 121, 128, 136 and 144 in lengths are 2.52 in pitch.
• Width: 15 in is the common width for trail snowmobiles; 16 in gives more flotation in deep snow (mountain, off-trail); 20 and 24 in are for wide-track utility snowmobiles. The width must match your chassis.
• Lug height: a lower lug reduces rolling resistance on groomed trails; a taller lug gives more traction and flotation in deep snow. Not every snowmobile accepts taller lugs than stock (tunnel clearance): check before ordering.
• Not sure? Send us your snowmobile's make, model and year and the number on your current track: we will confirm the right track for you.