Camso ICE Storm 150 Snowmobile Track (trail, studded)

With factory-installed studs, the ICE Storm 150 corners precisely on icy slopes, packed snow and groomed trails. Its dual-height lug design also brings deep-snow flotation.

Trail track: designed for groomed and hard-packed trail snow.

Studs: factory pre-studded track (Camso ICE series).

Features

• Factory pre-studded for traction and control on ice
• 1.25 in (32 mm) outer lugs for power through tight corners
• 1.5 in (38 mm) cupped center lugs for flotation and acceleration

Available sizes

How to choose the right track

• Length: according to Camso, length is the inside circumference of the track (drive pitch multiplied by the number of segments). It must match your original track: check the owner's manual or the number molded on your current track.
• Pitch: the distance between the drive sprocket teeth. According to Camso, it must match your existing track, or the drive sprockets must be changed. On Ski-Doo, Gen4 and Gen5 trail platforms generally use a 2.86 in pitch, while older REV platforms use 2.52 in. Handy reference in our lineup: 120, 129, 137 and 146 in lengths are 2.86 in pitch, and 121, 128, 136 and 144 in lengths are 2.52 in pitch.
• Width: 15 in is the common width for trail snowmobiles; 16 in gives more flotation in deep snow (mountain, off-trail); 20 and 24 in are for wide-track utility snowmobiles. The width must match your chassis.
• Lug height: a lower lug reduces rolling resistance on groomed trails; a taller lug gives more traction and flotation in deep snow. Not every snowmobile accepts taller lugs than stock (tunnel clearance): check before ordering.
• Not sure? Send us your snowmobile's make, model and year and the number on your current track: we will confirm the right track for you.